C92600 Leaded Tin Bronze

Copper Alloy No. C92600

Leaded Tin Bronze CDA 926

Chemical Composition % by weight

Element	Nominal	Minimum	Maximum
Aluminum	-	-	.005
Antimony	-	-	.25
Copper	87.3	86	88.5
Iron	-	-	.20
Lead	1.2	.8	1.5
Nickel	-	-	.7
Phosphorus	-	-	.03
Silicon	-	-	.005
Sulfur	-	-	.05
Tin	10	9.3	10.5
Zinc	2	1.3	2.5

Applications

Bearings, bushings, pump impellers, piston rings, valve components, steam fittings, gears.

Mechanical Properties

M07 - As Continuous Cast

Hardness*	Brinell Hardness (500 kg load)	70
Tensile Strength**	KSI	44
Yield Strength **	KSI (0.5% Ext. under load)	20
Elongation**	% in 2 inch	30

**Test values are nominal approximations and depend on specimen size and orientation.

Physical Properties

Thermal Conductivity	BTU/ (sq ft-ft-hr-F)	N/A
Specific Heat	BTU/lb/ºF @ 68F	.09
Thermal Expansion	Per °F from 68 F to 350 F	.000010
Density	lb/cu in @ 68 F	.315
Electrical Conductivity* (Annealed)	% IACS @ 68 F	9
Modulus of Elasticity	KSI	15,000

*Volume basis

Fabrication Practices

Stress relieving temperature	500 F or 260 C
Time at temperature	1 hour per inch of section thickness
Responds to heat treatment	No
Machinability rating (Free Cutting Brass=100)	40
Suitability for being joined by:	Soldering/Excellent
	Brazing/Good*
	Oxyacetylene Welding/Not Recommended
	Gas Shielded Arc Welding/Not Recommended
	Coated Metal Arc Welding/Not Recommended

*Since brazing is performed at temperatures within the hot-short range, strain must be avoided during the brazing and cooling of this alloy.

The values listed above represent reasonable approximations suitable for general engineering use. Due to commercial variations in composition and to manufacturing limitations, they should not be used for specification purposes. See applicable A.S.T.M. specification references.

http://www.conexbronze.com/technicalspecification/-C92600-Leaded-Tin-Bronze.html